Archives: Events

Loading Events

Past Events

Events Search and Views Navigation

Event Views Navigation

October 2021

Signal Person/Rigger Training – MAS Building & Bridge – Bellingham – CLOSED

October 27 @ 8:00 am - 3:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

3A/1C MA Hoisting License Preparation – Safe Harbor – Falmouth, MA – CLOSED

October 27 @ 8:00 am - 4:00 pm
Falmouth, MA Falmouth, Massachusetts + Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC Supply – Foxboro, MA – CLOSED

October 28 @ 8:00 am - October 29 @ 5:00 pm
Foxboro, MA Foxboro, Massachusetts + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Come Visit us at the National Precast Show – Colorado Springs, CO

October 28 @ 8:00 am - October 30 @ 5:00 pm
Find out more »

Customized/Specialty Class – Signalperson/rigger with Fall Protection and Confined Space – Bellingham MA – CLOSED

October 29 @ 8:00 am - 4:30 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This specialty class has been designed per the request of this customer and is being held at our location.  This is a closed class.  Please contact us if you would like to customize your own class. Signalperson/Rigger Certification Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This…

Find out more »

November 2021

Come visit us TCIA EXPO – Indianapolis, IN – BOOTH #420

November 4 @ 8:00 am - November 6 @ 5:00 pm

   

Find out more »

Signal Person/Rigger Training – Laurentano Sign – CT – CLOSED

November 5 @ 8:00 am - 3:00 pm
Terryville, CT Terryville, Connecticut + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Bucket Truck Operator Safety Training with Qualifications (if needed) – Bellingham, MA – OPEN – Call to Register

November 6 @ 8:00 am - 4:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be extensive hands on review of the equipment. Our trainer…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC Supply – Pensacola, FL – CLOSED

November 8 @ 8:00 am - 4:00 pm
Pensacola, FL Pensacola, Florida + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC Supply – Hyattsville, MD – CLOSED

November 9 @ 8:00 am - November 10 @ 5:00 pm
Hyattsville, MD Hyattsville, Maryland + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Office closed in observance of Veteran’s Day

November 11

THANK YOU VETERANS!

Find out more »

Mobile Crane Nationally Accredited Certificate Program – upgrade to Telescoping Boom Trucks – 1 DAY Specialty class – JW Field – MA – CLOSED

November 12 @ 8:00 am - 5:00 pm
Sandisfield, MA Sandisfield, Massachusetts + Google Map

This class has been requested by the customer to upgrade his certified crane operators to the next level of crane.  The instructor will prepare the attendees to take both a practical exam and the applicable written exam for their new certifications.   These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please…

Find out more »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

November 13 @ 8:00 am - 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

Bucket Truck Operator Safety Training with Qualifications – Bellingham MA – OPEN – CALL TO REGISTER

November 15 @ 8:00 am - 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be extensive hands on review of the equipment. Our trainer…

Find out more »

Bucket Truck Operator Safety Training (with Qualifications)- Bellingham, MA – OPEN REGISTRATION

November 16 @ 8:00 am - 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:  Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be extensive hands on review of the equipment. Our trainer…

Find out more »

Overhead Crane Operator Safety Class with 3A license prep – GLSD – N. Andover – CLOSED

November 16 @ 9:30 am - 12:30 pm
North Andover, MA North Andover, Massachusetts + Google Map

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) For more information as to the content of this class, please view the description here. Training Length:  3 to 4 Hour Course Use this form below to request more information. One of…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC Supply – Williamsburg, VA – CLOSED

November 17 @ 8:00 am - November 18 @ 5:00 pm
Williamsburg, VA Williamsburg, Virginia + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Bellingham, MA – FULL

November 17 @ 8:00 am - November 19 @ 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Overhead Crane Operator Safety Class – GLSD N. Andover – CLOSED

November 18 @ 9:30 am - 12:30 pm
North Andover, MA North Andover, Massachusetts + Google Map

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) For more information as to the content of this class, please view the description here. Training Length:  3 to 4 Hour Course Use this form below to request more information. One of our…

Find out more »

Bucket Truck Operator Safety Training with qualifications – Skyhook Tree – Sutton MA – CLOSED

November 20 @ 8:00 am - 4:00 pm
Sutton, MA Sutton, Massachusetts + Google Map

We provide bucket truck training online and in person, to help you get the required operator qualifications. This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI…

Find out more »

Signal Person/Rigger Training – Bellingham, MA – OPEN REGISTRATION

November 22 @ 8:00 am - 3:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Lauretano Sign – Terryville, CT – CLOSED

November 22 @ 8:00 am - November 24 @ 4:00 pm
Terryville, CT Terryville, Connecticut + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Overhead Crane Operator Safety Class with 3A MA Hoisting License Preparation – Mevion Medical – CLOSED

November 23 @ 8:00 am - 12:00 pm
Littleton, MA Littleton, Massachusetts + Google Map

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) For more information as to the content of this class, please view the description here. Training Length:  3 to 4 Hours for the Course; additional time needed if operator qualification to be included…

Find out more »

HAPPY THANKSGIVING!!

November 25
Find out more »

Bucket Truck Operator Safety Training with Qualifications – Arbor Services of CT – Warren CT

November 29 @ 8:00 am - 5:00 pm
Warren, CT Warren, Connecticut + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Rockton, IL – OPEN REGISTRATION – CALL TODAY!

November 30 @ 8:00 am - December 2 @ 4:00 pm
Rockton, IL Rockton, Illinois + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

December 2021

Overhead Crane Operator Safety Class with 3A MA License Prep and Operator Qualifications – Cytiva – Westboro, MA – CLOSED

December 1 @ 7:00 am - 2:00 pm
Westboro, MA Westboro, Massachusetts + Google Map

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. It includes hands-on training as well.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) For more information as to the content of this class, please view the description here. Training Length:  3 to 4 Hour Course Use this form below to request more information. One of our…

Find out more »

Bucket Truck Operator Safety Training with Qualifications – Pro Tree Service – Vassalboro, ME – OPEN REGISTRATION

December 1 @ 8:00 am - 5:00 pm
Vassalboro, ME Vassalboro, Maine + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Signal Person/Rigger Training – 3G Scaffolding – Norwell, MA – CLOSED

December 3 @ 8:00 am - 1:00 pm
Norwell, MA Norwell, Massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Tentative – Bucket Truck Operator Safety Training – MIIA – Berlin MA – CLOSED

December 3 @ 8:00 am - 5:00 pm
Berlin, MA Berlin, Massachusetts + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »
+ Export Events
Scroll to Top