Archives: Events

2A/1C MA Hoisting License Preparation/Continuing Education Course – Woodsmith Forestry – Montague, MA – CLOSED

Montague, MA Montague, Massachusetts

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ …

2A/1C MA Hoisting License Preparation/Continuing Education Course – Woodsmith Forestry – Montague, MA – CLOSED Read More »

2A/1C/4B MA Hoisting License Preparation – Maine Drilling & Blasting – MA – CLOSED

milford, ma Milford, Massachusetts

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ …

2A/1C/4B MA Hoisting License Preparation – Maine Drilling & Blasting – MA – CLOSED Read More »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ …

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN Read More »

Signal Person/Rigger Training – Danvers Electric – Danvers, MA – CLOSED

Danvers, MA Danvers, Massachusetts

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in …

Signal Person/Rigger Training – Danvers Electric – Danvers, MA – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – National Grid – NY – CLOSED

New Hartford, NY New Hartford, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – National Grid – NY – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – BELLINGHAM, MA – OPEN – Call 508-966-4100 to register

Bellingham, MA 57 Mendon Street, Bellingham, MA

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – BELLINGHAM, MA – OPEN – Call 508-966-4100 to register Read More »

Signal Person/Rigger Training – Danvers Electric – Danvers, MA – CLOSED

Danvers, MA Danvers, Massachusetts

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in …

Signal Person/Rigger Training – Danvers Electric – Danvers, MA – CLOSED Read More »

Bucket Truck Safety with Qualifications – Jubilee Yacht Club – Beverly MA – CLOSED

Beverly, MA Beverly, Massachusetts

  This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This …

Bucket Truck Safety with Qualifications – Jubilee Yacht Club – Beverly MA – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – Dahls Crane – Athens WI – CLOSED

Athens, WI Athens, Wisconsin

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – Dahls Crane – Athens WI – CLOSED Read More »

Signal Person/Rigger Training – SPS New England – Amesbury, MA – CLOSED

Amesbury, MA Amesbury, Massachusetts

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in …

Signal Person/Rigger Training – SPS New England – Amesbury, MA – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – National Grid – New Hartford, NY – CLOSED

New Hartford, NY New Hartford, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – National Grid – New Hartford, NY – CLOSED Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – Town of Milton – CLOSED

Milton, MA Milton, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – Town of Milton – CLOSED Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – NH DOT – CLOSED

Lancaster, NH Lancaster, New Hampshire

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – NH DOT – CLOSED Read More »

Bucket Truck Operator Safety Training – Boxbor Public Works – CLOSED

boxboro, ma Boxboro, MA

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training – Boxbor Public Works – CLOSED Read More »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

Bellingham, MA 57 Mendon Street, Bellingham, MA

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ …

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – Rutland DPW – CLOSED

Rutland, MA Rutland, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – Rutland DPW – CLOSED Read More »

Bucket Truck Operator Safety with Operator Evaluations – MIIA – CLOSED

Oxford, MA Oxford, MA

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety with Operator Evaluations – MIIA – CLOSED Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – MIIA – CLOSED

Westboro, MA Westboro, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – MIIA – CLOSED Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – Danvers Electric – CLOSED

Danvers, MA Danvers, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – Danvers Electric – CLOSED Read More »

OPEN – Mobile Crane Nationally Accredited Certificate Program – York, PA

York, PA York, PA

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

OPEN – Mobile Crane Nationally Accredited Certificate Program – York, PA Read More »

Bucket Truck Operator Safety Training with Operator Evaluations – Danvers Electric – CLOSED

Danvers, MA Danvers, Massachusetts

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training …

Bucket Truck Operator Safety Training with Operator Evaluations – Danvers Electric – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – BELLINGHAM, MA – OPEN – Call to register – 508-966-4100

Bellingham, MA 57 Mendon Street, Bellingham, MA

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – BELLINGHAM, MA – OPEN – Call to register – 508-966-4100 Read More »

3A License/Overhead Crane Operator Safety – Advantage Truck – Closed

Shrewsbury, MA Shrewsbury, MA

This overhead crane operator safety training course covers operation, inspection, rigging, owners’ responsibility and operators’ responsibility.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1). It also prepares for the 3A Massachusetts Hoisting Engineer licence exam per 520 MR …

3A License/Overhead Crane Operator Safety – Advantage Truck – Closed Read More »

MA 4B/RI Drill Rig License Prep – NE Boring – Closed

Derry, NH Derry, NH

This course will cover the necessary knowledge for both the MA 4B and RI Drill Rig license exams. If you are interested in Cranes101 coming to teach a similar course at your location, please call the office at 508-966-4100 or complete the form below.

Bucket Truck Inspection Class – Crane-Works

Olathe, KS Olathe, KS

This two day course is designed to cover the latest revisions of all relevant government and industry standards (OSHA 1910.67,1910.269, and ANSI A92.2) along with manufacturer’s requirements with regards to how they should be used during bucket truck inspections and creating reports detailing any deficiencies and recommendations. Course Content How the OSHA and ANSI standards …

Bucket Truck Inspection Class – Crane-Works Read More »

Mobile Crane Nationally Accredited Certificate Program – NG – Clifton Park, NY – CLOSED

Clifton Park, NY Clifton Park, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – NG – Clifton Park, NY – CLOSED Read More »

Mobile Crane Nationally Accredited Certificate Program – NRLA – Rensselaer NY – CLOSED

Rensselaer, NY Rensselaer, New York

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending …

Mobile Crane Nationally Accredited Certificate Program – NRLA – Rensselaer NY – CLOSED Read More »

Bucket Truck Inspection Course – Cherokee Truck

Mabelton, GA Mabelton, GA

This two day course is designed to cover the latest revisions of all relevant government and industry standards (OSHA 1910.67,1910.269, and ANSI A92.2) along with manufacturer’s requirements with regards to how they should be used during bucket truck inspections and creating reports detailing any deficiencies and recommendations. Course Content How the OSHA and ANSI standards …

Bucket Truck Inspection Course – Cherokee Truck Read More »

Scroll to Top