In Person Training Classes

Loading Events

Upcoming Events › In Person Training Classes

Events Search and Views Navigation

Event Views Navigation

December 2021

Customized 4 day Class – Mobile Crane Nationally Accredited Certificate Program – MAINE DOT – Scarborough ME – CLOSED

December 6 @ 8:00 am - December 9 @ 4:00 pm
Scarborough, ME Scarborough, Maine + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Bucket Truck Operator Safety Training with Operator Qualifications – Town of Barnstable – CLOSED

December 7 @ 7:30 am - 4:00 pm
Barnstable, MA Barnstable, Massachusetts + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Signal Person/Rigger Training – Eversource – Dorchester, MA – CLOSED

December 7 @ 8:00 am - 3:00 pm

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC SUPPLY – Telford, PA – CLOSED

December 8 @ 8:00 am - December 9 @ 5:00 pm
Telford, PA Telford, Pennsylvania + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Bucket Truck Safety Training with Operator Qualifications and 2A MA Hoisting License Prep – Zumalt Tree – Attleboro, MA – CLOSED

December 10 @ 8:00 am - 5:00 pm
Attleboro, MA Attleboro, Massachusetts + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – NRLA/Britton Lumber – Fairlee, VT – CLOSED

December 14 @ 8:00 am - December 16 @ 5:00 pm
Fairlee, VT Fairlee, Vermont + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Bucket Truck Operator Safety Training w/ Qualifications- Bellingham MA – SOLD OUT

December 14 @ 8:00 am - 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – ABC Supply – Cleveland, OH – CLOSED

December 15 @ 8:00 am - December 16 @ 5:00 pm
|Recurring Event (See all)

One event on December 3, 2021 at 8:00 am

Cleveland OH Cleveland, Ohio + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Bellingham, MA – OPEN REGISTRATION

December 15 @ 8:00 am - December 17 @ 4:00 pm

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

2C MA Hoisting License Preparation – Crane Currency – Dalton, MA – CLOSED

December 17 @ 8:00 am - 11:00 am
Dalton, MA Dalton, Massachusetts + Google Map

  You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form. …

Find out more »

January 2022

Mobile Crane Nationally Accredited Certificate Program – National Grid – Melville, NY – CLOSED

January 5, 2022 @ 8:00 am - January 7, 2022 @ 4:00 pm
Melville, NY Melville, New York + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – National Grid – NY – CLOSED

January 11, 2022 @ 8:00 am - January 13, 2022 @ 4:00 pm
Brightwaters, NY Brightwaters, New York + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Bucket Truck Operator Safety Training – Bellingham, MA – OPEN REGISTRATION

January 11, 2022 @ 8:00 am - 4:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Bellingham, MA – OPEN REGISTRATION – Call to register

January 12, 2022 @ 8:00 am - January 14, 2022 @ 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

January 15, 2022 @ 8:00 am - 5:30 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

Mobile Crane Nationally Accredited Certificate Program- ABC Supply – Avenal, NJ – CLOSED

January 20, 2022 @ 8:00 am - January 21, 2022 @ 5:00 pm
Avenel, NJ Avenel, New Jersey + Google Map

  These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating…

Find out more »

Signal Person/Rigger Training – RH White – Nashua, NH – CLOSED

January 20, 2022 @ 8:00 am - 1:00 pm
Nashua, NH Nashua, New Hampshire + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

TENTATIVE – Mobile Crane Nationally Accredited Certificate Program – Petersburg, IN

January 25, 2022 @ 8:00 am - January 27, 2022 @ 5:00 pm
Petersburg, IN Petersburg, Indiana + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

February 2022

Mobile Crane Nationally Accredited Certificate Program – National Grid – Brooklyn – NY – CLOSED

February 1, 2022 @ 8:00 am - February 3, 2022 @ 5:00 pm
Brooklyn, NY Brooklyn, New York + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Signal Person/Rigger Training – RH White – Auburn, MA (am class)- CLOSED

February 4, 2022 @ 7:00 am - 11:30 am
auburn, ma auburn, massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Signal Person/Rigger Training – RH White – Auburn MA (pm class) – CLOSED

February 4, 2022 @ 12:00 pm - 4:30 pm
auburn, ma auburn, massachusetts + Google Map

  This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Bellingham, MA – OPEN REGISTRATION

February 7, 2022 @ 8:00 am - February 9, 2022 @ 4:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

Signal Person/Rigger Training – RH White – Auburn, MA (am class) – CLOSED

February 11, 2022 @ 7:00 am - 11:30 am
auburn, ma auburn, massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Bucket Truck Operator Safety Training – RP Marzilli – Medway MA – CLOSED

February 11, 2022 @ 8:00 am - 4:00 pm
Medway, MA Medway, Massachusetts + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be hands-on review of the equipment. Our trainer will go…

Find out more »

Signal Person/Rigger Training – RH White – Auburn, MA (pm class) – CLOSED

February 11, 2022 @ 12:00 pm - 4:30 pm
auburn, ma auburn, massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

February 12, 2022 @ 8:00 am - 5:30 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

Mobile Crane Nationally Accredited Certificate Program – Gagne & Son – Belgrade ME – CLOSED

February 22, 2022 @ 8:00 am - February 24, 2022 @ 5:00 pm
Belgrade, ME Belgrade, Maine + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

TENTATIVE – Mobile Crane Nationally Accredited Certificate Program – Kistner Concrete – NY – CLOSED

February 23, 2022 @ 8:00 am - February 25, 2022 @ 5:00 pm

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

March 2022

Mobile Crane Nationally Accredited Certificate Program – Bellingham, MA – OPEN REGISTRATION

March 7, 2022 @ 8:00 am - March 9, 2022 @ 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type of crane you will be operating when you pre-register, if possible. Fixed/rotating boom…

Find out more »

2A/1B/1C MA Hoisting License Preparation/Continuing Education Course – Bellingham MA – OPEN

March 12, 2022 @ 8:00 am - 5:00 pm
Bellingham, MA, 57 Mendon Street
Bellingham, MA 02019 United States
+ Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »
+ Export Events
Scroll to Top