Archives: Events

Loading Events

Upcoming Events

Events Search and Views Navigation

Event Views Navigation

January 2020

Hoisting License Preparation Course MA 2A/1B – Open

January 25 @ 8:00 am - 5:30 pm
Cranes101 HQ Bellingham, MA United States + Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then take the class closest…

Find out more »

Bucket Truck Operator Safety Training – Warren, RI – Closed

January 27 @ 8:00 am - 2:00 pm

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. There will be extensive hands on review of the equipment. Our trainer will…

Find out more »

Signal Person/Rigger – Auburn MA – closed

January 28 @ 7:00 am - 2:00 pm
auburn, ma auburn, massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals  This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here.…

Find out more »

Overhead Crane Operator Safety Training and Rigging – Providence, RI – Closed

January 28 @ 8:00 am - 2:30 pm
providence, ri Providence, Rhode Island + Google Map

This overhead crane operator safety training course covers operation, inspection, rigging, owners' responsibility and operators' responsibility. This course is also bundled with additional rigging training to meet the needs of the host, which we are always happy to do.  This training meets the requirements mandated in OSHA Overhead and gantry cranes 29CFR1910.179(b)(8), ASME B30.16, B30.17 and OSH act of 1970 General Duty Clause 5(a)(1) For more information as to the content of this class, please view the description here. Training Length: …

Find out more »

1C/3A Continuing Education – Orleans, MA – Closed

January 29 @ 7:30 am - 2:00 pm
orleans, ma orleans, massachusetts + Google Map

Cranes101 curriculum has been approved by the State of Massachusetts and contains the proper content per the 520 CMR 6.04(b)6. This is a safety seminar that will earn the operator his/hers required CEU. This notice is to inform you of the general topics that will be discussed at the timeof training. For more information as to the content of this class, please view the descriptions here. Use this form below to request more information. One of our staff will be…

Find out more »

Confined Space/Lockout Tagout – Gloucester, MA – Closed

January 31 @ 8:00 am - 12:00 pm
gloucester, ma Gloucester, MA + Google Map

This confined space in construction training and certification is compliant with OSHA standard 1926.21 – Safety training and education. This particular course is combined with lockout/tagout training as a specific custom request. Please let us know if you have any custom requests like this.  This confined space in construction course is a focused operations and safety training for those in the construction industry. Certificate is awarded by Cranes 101. Material covered in this course: Attendant – Duties, Communications, Emergency procedures…

Find out more »

February 2020

1B License Prep-Boston MA

February 3 @ 8:00 am - 2:30 pm
Boston, MA Boston, Massachusetts + Google Map

  You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form. …

Find out more »

1B License Prep -Boston MA-closed

February 4 @ 8:00 am - 2:30 pm
Boston, MA Boston, Massachusetts + Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

2A/1C License Prep – Roxbury, MA – Closed

February 6 @ 8:00 am - 4:00 pm
roxbury, ma roxbury, Massachusetts + Google Map

You are required to have a Hoisting Engineer license to operate any equipment that lifts over 10 ft in height, over 500 lbs in weight or over 1/4 yard of bucket capacity in Massachusetts, per the 520 CMR 6.00 law. This course is designed to prepare the attendee for successful completion of the Hoisting Engineers’ license test. Cranes101 recommends that before taking this hoisting license preparation course to be sure to apply for a test date using this form.  Then…

Find out more »

Bucket Truck with Operator Qualifications – Waltham, MA – Closed

February 7 @ 8:00 am - 2:00 pm
Waltham, ma Waltham, Massachusetts + Google Map

This bucket truck operator safety training class is focused on operations and safety training for operators and ground workers. Material covered in this course:     Bucket truck setup     The mechanics of the bucket truck     Daily inspections     Working near electricity     ANSI and OSHA standards     Proper harness/belt configurations     Emergency procedures     Proper care and maintenance     Suspension trauma     Operator Qualification This training meets or exceeds all requirements of OSHA, ANSI A92.2 and your insurance company. The Bucket Truck Course will be include extensive…

Find out more »

Mobile Crane Nationally Accredited Certificate Course – Gillete, NJ – Open

February 8 @ 8:00 am - February 10 @ 4:00 pm
Gillete, NJ Gillette, New Jersey + Google Map

  These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC. This premium course is hosted by our partner New Jersey Crane Expert. To view the description and register for this course directly, click the link below under organizer.  

Find out more »

Mobile Crane Nationally Accredited Certificate Course – Bellingham, MA – Open

February 10 @ 8:00 am - February 12 @ 4:00 pm
Cranes101 HQ Bellingham, MA United States + Google Map
$1,995

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC. We hold an open class at our Bellingham, MA location about once a month. For more information as to the content of this open class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job. Please specify what type…

Find out more »

Mobile Crane Nationally Accredited Certificate Course – Bethlehem, PA – Closed

February 10 @ 8:00 am - February 12 @ 4:00 pm
Bethlehem, PA Bethlehem, Pennsylvania + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  This is an open class.   We also hold an open class at our Bellingham, MA location about once a month. For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the…

Find out more »

Mobile Crane Nationally Accredited Certificate Course – Bellingham, MA – Open

February 10 @ 8:00 am - February 12 @ 4:00 pm
Cranes101 HQ Bellingham, MA United States + Google Map

These all mobile crane nationally accredited certificate courses are NCCER/OSHA/ANSI approved programs for licensing crane operators. Crane operators must be licensed to operate per OSHA Subpart CC.  This is an open class.   We  hold an open class at our Bellingham, MA location about once a month. For more information as to the content of this class, please view the descriptions here. The list below shows the types of cranes this course can cover, depending on what the students operate on the job.…

Find out more »

Signal Person/Rigger – Auburn, MA – Closed

February 12 @ 7:00 am - 1:30 pm
auburn, ma auburn, massachusetts + Google Map

This live signalperson rigger certification course covers: Rigging component identification Mathematical calculations Sling selection Rigging inspection Wire rope and chain design Proper rigging techniques Proper use of the ANSI hand signals Crane limitations Crane characteristics and dynamics Signalperson requirements per OSHA 1926.1419-1926.1422 Working near power lines Voice signals This training meets the requirements mandated in OSHA 1926.1419 through 1926.1422 and 1926.1428, and ANSI/ASME B30 standards. For more information as to the content of this class, please view the descriptions here. Training Length:…

Find out more »
+ Export Events
Scroll to Top